Autopilot Servos

TLDR

• Installed Autopilot servos (GSA 28)

Details

I needed two GSA 28 for autopilot, one of roll and one for pitch.

Bolts

Installing the bolts and nuts were not fun, as the access is fairly restricted, but can be done. It took me quite a while but eventually I was able to torque all 8 bolts down.

Rotation stop

The other tricky part is that the Garmin rotation stop is too restrictive for Sling. I needed to grind both the stops down quite a bit to allow enough rotation space. I read this is the case from many other builders, so I just grinded them down before even bolting the servo into place.