Fuel Selector Fittings
TLDR
- Installed 90 degree fittings on the fuel selector
Details
I’m starting the internal fuel lines soon. Today I worked on the fuel selector.
The Andair fuel selector came with no fittings on it. And I needed to connect 6x 90 degree NPT->AN6 fittings.
Each fitting is connected to the fuel selector unit with 4 little screws. And Andair calls for loctite 648 to secure the screws. So I got to buy the 648 from Amazon.
With all the tools, I installed all 6 fittings. Since the fittings are very close to each other, I could not tighten them in place on the unit. I had to tighten them one at a time on the unit, then remove it to make space for the next one.
After all fittings are tightened, I added the screws to sceure them permanently.
