Post

Trim motor install

Posted Updated 0:30
By Fan Zhang
1 min read

TLDR

  • Tested trim wiring
  • Installed trim motor

Details

Today I received the new cotter pins from aircraft spruce, so I spent a few minutes to install the trim motor. ref ref

I also filled and sanded all rivets on the tail in the last few days. Everything is pretty much done in the empennage section, I cut the crate box apart and cleaned up my garage to make space for the next stage of my build :-)

Empennage, ~elevator
empennage trim EL-ASS-001-C-F-0 trim_motor
This post is licensed under CC BY 4.0 by the author.