wing 42
- Left tank: part 3 (leak test and install)
- Left wing: aileron and flap fully riveted
- Left wing: nav light is on
- Left wing: wing tip
- Left tank: part 2 (Sealing back channel)
- Remaking left landing light cover - Part 2
- Left tank, part 1 (Sealing ribs and skin)
- Left tank match drilling, left wing root trailing edge
- Left wing skin misc clean up, and discussing panel with MPB
- Completing the right fuel tank
- Remaking left landing light cover - Part 1
- Left wing: landing light cover and fuel level sender
- Mocking left tank and filling rivets
- Right wing: lights and lens, wing tip and wing stand
- Prosealing the right fuel tank, left wing leading edge & lights
- Left top skin, and landing lights
- Misc work, but mostly fuel tank
- Right leading edge and fuel tank prep
- Right leading edge done
- Built the left flap
- Fuselage kit arrived, and left aileron
- Installing pitot tube
- Left bottom skin riveted
- Left bottom skin clecoed, and some rivet drilling
- Right aileron, flap, trailing edge, and left spar
- Right leading edge skin damage
- Lots of things going on the right wing, and starting on the left
- Right aileron part prep
- Right leading edge done
- Clecoing left ribs, and update on rivet gun
- Right top skin and leading edge
- Rib 9 fix, and starting right top skin
- right wing harness
- Working on right top skin and left ribs
- Right bottom skin riveted
- Right bottom skin fitting and an successful experiment
- Right spar assembly 4 complete, started assmebly 3
- Starting to rivet ribs to spar
- Cleaning left ribs, and found a crack
- Right wing ribs, and lots of debur
- Getting started on the right wing (rear spar and a few ribs)
- Wing kit and dimple template