Post

Propeller - Part 2

Posted 1:00
By Fan Zhang
1 min read
Propeller - Part 2

TLDR

  • Assembled the propeller hub
  • Fit the hub onto the engine flange

Details

Assembled the propeller hub

Last time I already put the hub together. But when I connected them I did not put loctite on the screws.

I took it apart and put some loctite 222 on the small screws, and then put it back together.

And I also connected the wires from the hub to the hub’s brush flange.

img

img

img

Fitting on the engine flange

After the hub is fully assembled, I took it to the engine flange to fit it on. I then hand tightened the 6 bolts to put the hub in place. The bolts went in very easily.

Engine, ~propeller
propeller propeller_hub
This post is licensed under CC BY 4.0 by the author.