Propeller - Part 3

TLDR

• Torqued propeller hub
• Installed the hub brush assembly

Details

Torqued propeller hub

Torquing the 6 AN5 bolts on the hub was pretty straightforward with a crowfoot.

I turned the crowfoot 90 degrees perperpendicular to the torque wrench to avoid any moment arm error, and turned the bolts in a star pattern to ensure even pressure. The final torque value is 24 NM.

Brush Assembly

Also pretty easy. The brush assembly goes onto the engine with two M8 bolts. The instruction manual says to torque them to 10NM.